2. Log List Search/Alarm, Motion Search
The Log Lists can be used to search and review recorded data from a given point in time. Alarm, Motion, Video Loss and System related logs can be searched and played back directly from the time of the incident.
１. To start an Event Search, press the 
[Log] button on the IR Remote and the Log List Menu pops up, as shown below.
MENU TAB | CONDITION |
ALL | y Is a list of all the events since the initial power on procedure of the DVR |
|
|
SYSTEM | y Shows Events except for Alarm, Motion, and Video Loss. |
|
|
NETWORK | y Shows the NETWORK List. |
|
|
ALARM | y Displays all the Alarms Logged. |
|
|
MOTION | y Shows the Motion Log List. |
|
|
VIDEO LOSS | y Displays the Video Loss Log List. |
|
|
2.Use the Up/Down buttons [TS] to move to the “Time” to playback. Use the Left/Right buttons [WX] to move to the NEXT page.
3.Press the [ENTER] button to start playback.
Note: Log List is saved on HDD.
Note: To save the log, plug a USB memory stick into the USB port on the front panel. Press the Display button on each category to backup Log data. Blue USB Icon flashes.
BDVR Manual | 59 | Version 1.2 |
