Genie BDVR-16, BDVR-8, BDVR-4 manual Example RECORDING STATUS, Motion

<Example 3>

RECORDING STATUS

USE	MOTION
ON	ON

ALARM RECORDING STATUS

ON

zResulting Actions:

Press the REC button to commence motion recording, based on the configuration shown above (High picture quality at 15 F/S without audio). If an Alarm is triggered on this channel, the configuration changes to Super picture quality at 6F/S with Audio. The system reverts back to stand-by mode for Alarm or Motion once alarm recording finishes.

The DVR system starts recording when an Alarm is triggered or Motion is detected.

Note:

zIf two or more recording modes (Alarm, Motion or Continuous) are operational, the alarm recording mode takes the highest priority followed by motion and then the continuous recording mode.

BDVR Manual 39 Version 1.2