HP XW3400 manual Inventory error during MEBx execution, Then save changes

Table C-1Numeric Codes and Text Messages (continued)

Control panel message	Description	Recommended action
2202-PMM Deallocation Error during MEBx	Memory error during POST execution of the	1.	Reboot the workstation.
cleanup	Management Engine (ME) BIOS Extensions	2.	Unplug the power cord, re-seat the
	option ROM
			memory modules, and reboot the
			workstation.
		3.	If the memory configuration was recently
			changed, unplug the power cord, restore
			the original memory configuration, and
			reboot the workstation.
		4.	If the error persists, replace the system
			board.
2203-Setup error during MEBx execution	MEBx selection or exit resulted in a setup	1.	Reboot the workstation.
	failure.	2.	Unplug the power cord, re-seat the
			memory modules, and reboot the
			workstation.
		3.	If the memory configuration was recently
			changed, unplug the power cord, restore
			the original memory configuration, and
			reboot the workstation.
		4.	If the error persists, replace the system
			board.
2204-Inventory error during MEBx execution	BIOS information passed to the MEBx resulted	1.	Reboot the workstation.
	in a failure.	2.	If the error persists, update to the latest
			BIOS version.
		3.	If the error still persists, replace the
			system board.
2205-Interface error during MEBx execution	MEBx operation experienced a hardware	1.	Reboot the workstation.
	error during communication with ME.	2.	If the error persists, update to the latest
			BIOS version.
		3.	If the error still persists, replace the
			system board.
Invalid Electronic Serial Number	Electronic serial number has become	1.	Run Computer Setup. If Setup already
	corrupted.		has data in the field or will not allow
			the serial number to be entered,
			download from http://www.hp.com
			and run SP5572.EXE (SNZERO.EXE).
		2.	Run Computer Setup and try to enter
			serial number under Security, System ID,
			then save changes.
Network Server Mode Active and No	Keyboard failure while Network Server Mode	1.	Reconnect keyboard with workstation
Keyboard Attached	enabled.		turned off.
		2.	Check connector for bent or missing pins.
		3.	Ensure that none of the keys are
			depressed.
		4.	Replace keyboard.

ENWW POST numeric codes and text messages 113