HP XW3400 manual Post numeric codes and text messages, Table C-1Numeric Codes and Text Messages

POST numeric codes and text messages

This section covers those POST errors that have numeric codes associated with them. The section also includes some text messages that may be encountered during POST.

NOTE: The workstation will beep once after a POST text message is displayed on the screen.

Table C-1Numeric Codes and Text Messages

Control panel message	Description	Recommended action
101-Option ROM Checksum Error	System ROM or expansion board option ROM	1.	Verify the correct ROM.
	checksum.	2. Flash the ROM if needed.
		3. If an expansion board was recently
			added, remove it to see if the problem
			remains.
		4.	Clear CMOS.
		5. If the message disappears, there may
			be a problem with the expansion card.
		6. Replace the system board.
103-System Board Failure	DMA or timers.	1.	Clear CMOS.
		2. Remove expansion boards.
		3. Replace the system board.
110-Out of Memory Space for Option ROMs	Recently added PCI expansion card contains	1.	If a PCI expansion card was recently
	an option ROM too large to download during		added, remove it to see if the problem
	POST.		remains.
		2. In Computer Setup, set Advanced >
			Device Options > NIC PXE Option
			ROM Download to DISABLE to
			prevent PXE option ROM for the internal
			NIC from being downloaded during
			POST to free more memory for an
			expansion card's option ROM. Internal
			PXE option ROM is used for booting from
			the NIC to a PXE server.
		3.	Ensure the ACPI/USB Buffers @ Top of
			Memory setting in Computer Setup is
			enabled.

162-System Options Not Set	Configuration incorrect.
	RTC (real-time clock) battery may need to
	be replaced.

Run Computer Setup and check the configuration in Advanced > Onboard Devices.

Reset the date and time under Control Panel. If the problem persists, replace the RTC battery. See the Hardware Reference Guide on the Documentation and Diagnostics CD for instructions on installing a new battery, or contact an authorized dealer or reseller for RTC battery replacement.

163-Time & Date Not Set	Invalid time or date in configuration memory. Reset the date and time under Control
	Panel (Computer Setup can also be used). If
	the problem persists, replace the RTC battery.

108 Appendix C POST error messages ENWW