Table
Power LED flashes Red five times, once every second, followed by a two second pause, and the workstation beeps five times. (Beeps stop after fifth iteration but LEDs continue flashing.)
Cause | Solution | |
|
|
|
Memory is installed incorrectly or is bad. | 1. | Reseat DIMMs. Power on the system. |
| 2. | Replace DIMMs one at a time to isolate the faulty module. |
| 3. Replace | |
| 4. | Replace the system board. |
|
|
|
ENWW | Solving memory problems 149 |