Smart Cover Sensor
CoverRemoval Sensor, available on some models, is a combination of hardware and software technology that can alert you when the workstation cover or side panel has been removed. There are three levels of protection, as described in the following table.
Table | Smart Cover Sensor Protection Levels | |
|
|
|
Level | Setting | Description |
|
|
|
Level 0 | Disabled | Smart Cover Sensor is disabled (default). |
|
|
|
Level 1 | Notify User | When the workstation is restarted, the screen displays a message |
|
| indicating that the workstation cover or side panel has been removed. |
|
|
|
Level 2 | Setup Password | When the workstation is restarted, the screen displays a message |
|
| indicating that the workstation cover or side panel has been removed. |
|
| You must enter the setup password to continue. |
NOTE: These settings can be changed using Computer Setup. For more information about Computer Setup, see the Computer Setup (F10) Utility Guide on the Documentation and Diagnostics CD.
Setting the Smart Cover Sensor protection level
To set the Smart Cover Sensor protection level, complete the following steps:
1. Turn on or restart the workstation. If you are in Windows, click Start > Shut Down > Restart.
2. As soon as the workstation is turned on, press F10 when the monitor light turns green to enter Computer Setup. Press Enter to bypass the title screen, if necessary.
NOTE: If you do not press F10 at the appropriate time, you must restart the workstation and again press F10 when the monitor light turns green to access the utility.
3. Select Security > Smart Cover > Cover Removal Sensor, and select the desired security level.
4. Before exiting, click File > Save Changes and Exit.
Smart Cover Lock
The Smart Cover Lock is a
CAUTION: For maximum cover lock security, be sure to establish a setup password. The setup password prevents unauthorized access to the Computer Setup utility.
NOTE: The Smart Cover Lock is available as an option on some systems.
ENWW | Asset tracking and security 43 |