4. Plug in the workstation and turn on power to the workstation.
5. Reset the date and time, your passwords, and any special system setups, using Computer Setup. Refer to Section 2.2.
Type 3 Battery Holder
1. Pull back on the clip (1) that holds the battery in place, then remove the battery (2).
2. Insert the new battery and position the clip back in place.
3. Replace the workstation access panel (Access panel on page 61).
4. Plug in the workstation and turn on power to the workstation.
5. Reset the date and time, your passwords, and any special system setups, using Computer Setup. Refer to Section 2.2.
94 Chapter 7 Removal and replacement procedures | ENWW |