Connecting the drain hose

• the socket is compatible with the washing

EN

machine’s plug. If this is not the case, replace

 

65 - 100 cm

Connect the drain hose, without bending it, to a draining duct or a wall drain situated between 65 and 100 cm from the floor;

the socket or the plug.

Your appliance is now supplied with a 13 amp

fused plug it can be plugged into a 13 amp

socket for immediate use. Before using the

appliance please read the instructions below.

WARNING - THIS APPLIANCE MUST BE

EARTHED.

THE FOLLOWING OPERATIONS SHOULD

BE CARRIED OUT BY A QUALIFIED

Where it connects to the waste water pipe cut end off spigot or remove the blanking cap

The drain hose may be connected to an under-sink trap. Before connecting the drain hose from the machine ensure that any blanks or removable ends have been taken off the spigot.

If it is placed over the edge of a basin or sink be sure the free end of the hose should not be underwater.

ELECTRICIAN.

Replacing the fuse:

When replacing a faulty fuse, a 13 amp ASTA

approved fuse to BS 1362 should always be

used, and the fuse cover re-fitted. If the fuse

cover is lost, the plug must not be used until a

replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must

be of the correct colour as indicated by

the coloured marking or the colour that is

embossed in words on the base of the plug.

Replacements can be obtained directly from

your nearest Service Depot.

Removing the plug:

If your appliance has a non-rewireable

moulded plug and you should wish to re-route

the mains cable through partitions, units etc.,

please ensure that either:

!We advise against the use of hose extensions; in case of absolute need, the extension must have the same diameter as the original hose and must not exceed 150 cm in length. Ensure that if the drain hose is pushed into a standpipe, that the end does not go down more than 15cms (6 inches). If the hose is pushed down too far, this may cause the machine to self -syphon ie. continuously empty as it is filling.

Electric connection

Before plugging the appliance into the mains socket, make sure that:

•the socket is earthed and in compliance with the applicable law;

•the socket is able to sustain the appliance’s maximum power load indicated on the Technical Data Plate fixed on the machine.

•the supply voltage is included within the values indicated on the Technical Data Plate fixed on the machine.

the plug is replaced by a fused 13 ampere

rewireable plug bearing the BSI mark of approval.

or:

 

the mains cable is wired directly into a 13

amp cable outlet, controlled by a switch, (in

compliance with BS 5733) which is accessible

without moving the appliance.

Disposing of the plug:

 

Ensure that before disposing of the plug itself,

you make the pins unusable so that it cannot

be accidentally inserted into a socket.

Instructions for connecting cable to an

alternative plug:

 

Important: the wires in the mains lead are

coloured in accordance with the following code:

Green & Yellow

Earth

Blue

Neutral

Brown

Live

3

Page 2 Page 4
Page 3
Image 3
Hotpoint AQ113DA 697 E manual When replacing a faulty fuse, a 13 amp Asta, Approved fuse to BS 1362 should always be
Page 2 Page 4

AQ113DA 697 E, WASHING MACHINE AQUALTIS specifications

The Hotpoint Washing Machine Aqualitis, model AQ113DA 697 E, exemplifies a blend of advanced technology, efficient washing performance, and user-friendly features, making it a popular choice for households seeking reliable laundry solutions. With a generous 11 kg load capacity, this model accommodates the laundry needs of larger families, allowing for fewer wash cycles and optimized time savings.

One of the standout features of the AQ113DA 697 E is its unique Aqualitis technology. This innovative system is designed to adapt the washing process to individual loads and fabric types, ensuring that each garment receives the appropriate care and cleaning. The machine intelligently adjusts water levels and cycle duration, promoting efficiency and preventing damage to delicate fabrics.

The washing machine also boasts an impressive energy efficiency rating of A+++, making it an environmentally friendly option. This rating not only signifies lower energy consumption but also translates into potential savings on utility bills. The eco-friendly design extends to the machine’s Eco Digital display, which not only allows users to monitor cycle progress but also provides information on energy usage, further emphasizing energy conservation.

With a variety of wash programs, including specialized cycles for cottons, synthetics, delicates, and quick washes, the AQ113DA 697 E caters to a range of laundry requirements. The dedicated Anti-Stain program effectively tackles tough stains, ensuring that clothes come out looking fresh and clean. Additionally, the machine's speedy wash option is perfect for those times when laundry needs to be done on a tight schedule, delivering clean clothes in as little as 30 minutes.

Furthermore, the machine's Quiet Mark certification indicates that it operates with minimal noise, making it suitable for homes where a peaceful environment is essential. The inverter motor technology enhances this feature by providing a quieter and more reliable performance over time.

Safety is also a priority with the Hotpoint Aqualitis. The anti-overflow system and child lock feature offer peace of mind, particularly in homes with young children. The sleek design and modern aesthetics of the machine make it a stylish addition to any laundry room.

In summary, the Hotpoint Washing Machine Aqualitis AQ113DA 697 E is a versatile and efficient appliance with a range of innovative technologies and user-friendly features, making laundry day a hassle-free experience for families of all sizes.
Top Page Image Contents