Installation

EN

! This instruction manual should be kept in a

 

safe place for future reference. If the washing

 

machine is sold, given away or moved, please

 

ensure the manual is kept with the machine,

 

so that the new owner may benefit from the

 

advice contained within it.

 

! Read these instructions carefully: they

 

contain vital information relating to the safe

 

installation and operation of the appliance.

 

! Inside the pack containing this manual, you

 

will also find the guarantee and all the details

 

necessary for installation.

 

Unpacking and levelling

Unpacking

1.Once you have removed all the packaging from the washing machine, make sure it has not been damaged during transportation.

If it has been damaged, contact the retailer and do not proceed any further with the installation process.

2.Remove the 4

protective screws (used during transportation) and the corresponding spacer, located on the rear part of the appliance (see figure). 3. Close off the holes using the plastic plugs supplied in the pack.

4.Keep all the parts in a safe place; they will be needed again if the washing machine is moved to another location, to prevent the inside of the appliance being damaged.

! Packaging materials should not be used as toys for children.

Levelling

1.Place the washing machine on a flat sturdy floor, without resting it up against walls, cabinets anything else.

2. If the floor is uneven, the front feet of the machine may be adjusted until it reaches a horizontal position (the angle of inclination must not exceed 2 degrees).

!If the appliance is levelled correctly, it will be more stable and much less likely to cause vibrations and noise while it is operating, particularly during the spin cycle.

!If it is placed on carpet or a rug, adjust the feet in such a way as to allow a sufficient ventilation space underneath the washing machine.

Connecting the electricity and water supplies

Connecting the water inlet hose

!Before connecting the inlet hose to the water supply, run the water until it is perfectly clear.

1. Connect the inlet hose to the machine by screwing it onto the cold water inlet of the appliance, which is situated on the top right-hand side of the rear part of the appliance (see figure).

2. Connect the inlet hose by screwing it to a cold water tap using a 3/4 gas threaded connection (see figure).

3.Make sure that the hose is not folded over or bent.

!The water pressure at the tap must fall within the values indicated in the Technical data table (see page 5).

!If the inlet hose is not long enough, contact a specialised shop or an authorised technician.

!Never use second-hand or old inlet hoses; use the products supplied with the machine.

2

Page 1 Page 3
Page 2
Image 2
Hotpoint WASHING MACHINE AQUALTIS Installation, Unpacking and levelling, Connecting the electricity and water supplies
Page 1 Page 3

AQ113DA 697 E, WASHING MACHINE AQUALTIS specifications

The Hotpoint Washing Machine Aqualitis, model AQ113DA 697 E, exemplifies a blend of advanced technology, efficient washing performance, and user-friendly features, making it a popular choice for households seeking reliable laundry solutions. With a generous 11 kg load capacity, this model accommodates the laundry needs of larger families, allowing for fewer wash cycles and optimized time savings.

One of the standout features of the AQ113DA 697 E is its unique Aqualitis technology. This innovative system is designed to adapt the washing process to individual loads and fabric types, ensuring that each garment receives the appropriate care and cleaning. The machine intelligently adjusts water levels and cycle duration, promoting efficiency and preventing damage to delicate fabrics.

The washing machine also boasts an impressive energy efficiency rating of A+++, making it an environmentally friendly option. This rating not only signifies lower energy consumption but also translates into potential savings on utility bills. The eco-friendly design extends to the machine’s Eco Digital display, which not only allows users to monitor cycle progress but also provides information on energy usage, further emphasizing energy conservation.

With a variety of wash programs, including specialized cycles for cottons, synthetics, delicates, and quick washes, the AQ113DA 697 E caters to a range of laundry requirements. The dedicated Anti-Stain program effectively tackles tough stains, ensuring that clothes come out looking fresh and clean. Additionally, the machine's speedy wash option is perfect for those times when laundry needs to be done on a tight schedule, delivering clean clothes in as little as 30 minutes.

Furthermore, the machine's Quiet Mark certification indicates that it operates with minimal noise, making it suitable for homes where a peaceful environment is essential. The inverter motor technology enhances this feature by providing a quieter and more reliable performance over time.

Safety is also a priority with the Hotpoint Aqualitis. The anti-overflow system and child lock feature offer peace of mind, particularly in homes with young children. The sleek design and modern aesthetics of the machine make it a stylish addition to any laundry room.

In summary, the Hotpoint Washing Machine Aqualitis AQ113DA 697 E is a versatile and efficient appliance with a range of innovative technologies and user-friendly features, making laundry day a hassle-free experience for families of all sizes.
Top Page Image Contents