Paradyne 3800PLUS manual Editing and Saving a Configuration Option

Configure Branch

Editing and Saving a Configuration Option

The following example shows how to change the Remote Access Password using the DCP. (If you ever intend to access another 3800Plus Series modem via the Remote branch of the Top-Level menu, the Remote Access Password must be the same for both modems.) By following these procedures you learn how to load a factory preset configuration area (in this case, Async Dial), how to edit a configuration option (Remote Access Password), and how to save changes to a configuration area (Active (Saved)). The shaded key indicates what key to press.

Idle : 28.8
Test	Configure
F1	F2	F3

Select Configure from the Top-Level menu.

Ld EditArea frm		>
Activ (Operating)
F1	F2	F3

Ld EditArea frm		<
Factory
F1	F2	F3

Select the Factory configuration area.

Ld Fact Preset :		>
Async_Dial
F1	F2	F3

Select Async_Dial.

Choose Function

EditSave

F1 F2 F3

Select Edit.

Edit StrapGroup		>
DTE_Interface
F1	F2	F3

Scroll to and select the Misc configuration options group.

Edit StrapGroup		<
Test		Misc
F1	F2	F3

StrapsWhenDisc >

Nxt No_Change

F1 F2 F3

Select Nxt until RemAccssPasswrd appears.

RemAccssPasswrd

Nxt￿￿°00000000

F1 F2 F3

Select the F2 (°) key to increment password values.

3980-A2-GB30-20 November 1996 8-5