Paradyne 3800PLUS 10 of 3800Plus AT Commands, Description, Front Panel Branch, CTS Control, Break

COMSPHERE 3800Plus Modems

Table 13-1

(10 of 11)

3800Plus AT Commands

AT Command			Description			Front Panel Branch
\An	Error Control Maximum Frame Size					Configure\Edit\
	\A0	64				V42/MNP/Buffer
	\A1	128
	\A2	192
	\A3	256
	\A4	32
	\A5	16
\Cn	Error Control Negotiate Buffer					Configure\Edit\
	\C0	Disable.				V42/MNP/Buffer
	\C1	Enable.
	\C2	Disables and switches modem to Buffer mode.
\Dn	CTS Control					Configure\Edit\
	\D0 Forced On. Forces CTS to always ON.					DTE Interface
	\D1	Standard RS232.
	\D2	Wink When Disconnect. CTS is turned Off for 1 to 2 seconds upon
		a disconnect.
	\D3	Follows DTR. The state of CTS follows the state of DTR.
\Gn	Modem to Modem Flow Control					Configure\Edit\
	\G0	Disable.				V42/MNP/Buffer
	\G1	Enable.
\Kn	Break Buffer Control, Send Break Control, Break Forces Escape					Break Buffer Control:
						Configure\Edit\
			Break	Send	Break	V42/MNP/Buffer
						Send Break Control:
			Buffer	Break	Forces
			Control	Control	Escape	Configure\Edit\
						V42/MNP/Buffer
		\K0	Discard Data	Break First	Enable	Break Forces Escape:
		\K1	Discard Data	Break First	Disable	Configure\Edit\
		\K2	Keep Data	Break First	Enable	DTE Dialer
		\K3	Keep Data	Break First	Disable
		\K4	Keep Data	Data First	Enable
		\K5	Keep Data	Data First	Disable
		\K6	Discard Break	Not Applic.	Disable
\Nn	Error Control Mode					Configure\Edit\
	\N0	Buffer Mode.				V42/MNP/Buffer
	\N1	Direct Mode.
	\N2	MNP or Disconnect.
	\N3	MNP or Buffer.
	\N4	V.42/MNP or Disconnect.
	\N5	V.42/MNP or Buffer.
	\N6	LAPM or Disconnect.
	\N7	LAPM or Buffer.

13-12 November 1996 3980-A2-GB30-20