Paradyne 3800PLUS Dial-Line Connection, 3810Plus 4-Wire/2-Wire Leased-Line Network Connection

COMSPHERE 3800Plus Modems

DIAL
LEASED	DTE 1	NMS	PWR	ON	OFF
(3820Plus)

	DB-25-P
	CONNECTOR
	FOR DATA
	TERMINAL
	EQUIPMENT
6-POSITION PLUG	OPERATION
FOR PERMISSIVE		SUB-MINIATURE
DIAL NETWORK
OPERATION		4-POSITION
OR 2-WIRE		PLUG FOR		POWER
LEASED LINE		NETWORK		SUPPLY
		MANAGEMENT
		SYSTEM
		OPERATION	495-14680

Figure 2-3. 3820Plus Rear Panel

Dial-Line Connection

Use the following procedure to connect the 3810Plus or 3820Plus modem to the dial network interface:

1.Insert the 6-position, 4-conductor modular plug into the jack labeled DIAL/LEASED (Figure 2-3).

2.Insert the other end of the modular cord into the dial network interface (ªdemarcº).

3810Plus 4-Wire/2-Wire Leased-Line Network Connection

Use the following procedure to connect a 3810Plus modem to the leased-line network interface:

1.Insert the 8-position, 8-conductor modular plug into the jack labeled LEASED (3810Plus) (Figure 2-2).

2.Insert the other end of the modular cord into the leased-line network interface (ªdemarcº).

3.If you intend to use dial backup, follow steps listed in 3810Plus Dial-Line Connection section.

2-4 November 1996 3980-A2-GB30-20