Paradyne 3800PLUS manual Edit Password Table Group Options, Edit PsWd Nxt yyyyyyyy or zzzzzz

Security

Table 11-1

Edit Password Table Group Options

PsWdType xxxx

Nxt Cleared DTE Entry VF_Entry VF_plus_DTE

Password Type. Indicates whether this index location is configured for VF-side password, DTE-side password, or both. Cleared displays for an index location that contains no valid entry. Note that this option only identifies the type of password used. For proper operation, the type of password selected must be consistent with the type of security used. Refer to the Set Answer Security group option found later in this chapter.

xxxx± Indicates the selected index location.

Cleared ± Indicates that the index location does not contain any valid selections and is currently unused.

DTE Entry ± Indicates that this index's password is configured for DTE-side password entry. Special requirements apply when using DTE passwords if the Set Answer Security option (Answer Security mode) is set to VF_&_DTE or VF_w/_DTE. Refer to the note following VF plus DTE.

VF Entry ± Indicates that this index's password is configured for VF-side password entry. This selection requires that the Set Answer Security option (Answer Security mode) be set to VF_&_DTE.

VF plus DTE ± Indicates that both layers of password entry are used with this index's password. This location is configured so that the answering modem sends a prompt for the DTE-side password after receiving a valid VF-side password. This setting requires that the Set Answer Security option be set to VF_&_DTE or VF_w/_DTE.

NOTE: If the Set Answer Security option (Answer Security mode) is set to VF_&_DTE or VF_w/_DTE, special requirements apply in order to use passwords with their type set to DTE_Entry. The originating caller must first enter a valid VF password. If the VF password entered is configured in the security database with the type VF_plus_DTE, the user is then required to enter a password configured in the database table with the type DTE_Entry. In the case of VF_w/_DTE mode, the DTE Entry password must immediately follow the VF_plus_DTE password in the password table.

Edit PsWd xxxx

Nxt " yyyyyyyy or zzzzzz

Edit Password. Allows the password associated with this index to be changed.

NOTE: This security option does not appear if the Password Type option is set for Cleared.

xxxx± Indicates the current index location value.

yyyyyyyy± Indicates the current password value for this index. If the Password Type is VF_Entry or VF_plus_DTE, then the password value is an 8-digit decimal number.

zzzzzz± Indicates the current password value for this index. If Password Type is configured for DTE_Entry, then the password value is a 10-character alphanumeric number.

Save Edit? xxxx

Edit Save Yes No

Save Edit. Saves any changes made in the EditPassWdTable group.

xxxx± Indicates the current index field value.

Edit ± Returns the LCD to the Password Type option and does not save any changes made to the index or password table.

Save ± Saves changes made to the index or Password Table. Once selected, the Select Index screen appears and increments to the next index value.

Yes No ± Appears only if changes are made to any of the options within the Password Table and the or key is pressed before reaching the Save Edit? option. After deciding whether or not to save changes, the LCD displays Select Index and increments to the next index value.

3980-A2-GB30-20 November 1996 11-7