Chapter 4: Configuration
4.2.6 Miscellaneous functions
4.2.6.1 To reset configuration to factory defaults
1Enter the Configuration menu.
2Press 
to enter the Functions menu
3Press 
and then 
. The display will show 
momentarily.
4Press 
and then 
to exit the menu and save changes.
4.2.6.2 To show the current firmware version
1Enter the Configuration menu.
2Press 
to enter the Functions menu
3Press 
and then 
.
The display will blank for a short while and then the major number of the firmware revision will be shown. The display will blank again and then show the first digit of the minor number. Following another blank, the second digit of the minor number will be displayed. e.g. <blank> 1 <blank> 0 <blank> 2 <blank> equals v1.02
4Press 
and then 
to exit the menu and save changes.
4.2.6.3 To set a new password
1Enter the Configuration menu.
2Press 
and then 
. The display will show 
3Enter a new password and then 
. See 5.1.4 Locking access to the computers
4Press 
and then 
to exit the menu and save changes.
Page 21 |
