Chapter 5: Operation
5.2.2 To select an autoscan period
1Enter the Configuration menu.
2Press 
and then press either: 
to choose Autoscan disabled, 
to choose 2 seconds,
to choose 5 seconds,
to choose 7 seconds,
to choose 15 seconds,
to choose 30 seconds,
to choose 1 minute, or
to choose 5 minutes.
3Press 
to accept the setting and return to the main menu section.
4Press 
and then 
to exit the menu and save changes.
5.2.3 To start autoscanning
• On the keyboard, press 
. Notes:
During autoscanning, mouse switching, hot key + tab and interactivity with the computers are all disabled.
During autoscanning, only the KVM and speaker ports are switched to each visited computer channel, the two USB device ports remain connected to their currently selected channels.
5.2.4 To stop autoscanning
You can stop the autoscanning process in either of the following ways:
•Press the COMPUTER button on the front panel, or
•Select a specific channel using the hot keys + channel number.
Page 31 |
