Chapter 5: Operation
5.1.2.3 Additional hotkey press combinations
In addition to the standard hotkey press combinations (shown left), you can also add additional keypresses in order to determine which peripherals are switched:
1Simultaneously press and hold 
and 
.
2Press and release a command key: 
to switch all peripherals
to switch only the keyboard, video and mouse
to switch only the speakers
to switch only USB1 and USB2
3Press and release the required channel number (
to 
using only the keys above the QWERTY section).
4Release 
and 
.
The appropriate peripherals will change to the chosen channel.
Note: Regardless of which peripherals were switched, the front panel indicators will continue to show the switching mode that was last determined using the front panel controls.
Page 27 |
