Grundig 5550 HDD manual Finalising a disc DVD+R/-R/-RW, Error messages, Recording On Disc

RECORDING ON DISC___________________

Sys state: RECORDING
Record To Optical Disc as (25min/GB)
Elapsed Time: 00:00:10	Remain Space: 02:04:50
Select
and	HDD	Exit
Choose

5Press »●« to start recording.

– The amount of recording time available is shown.

Notes:

During the recording, you can press »●« to enter the switch-off time (30 minutes, 60 minutes, 90 minutes, none).

The switch-off time depends on the playing time left on the disc.

The HDD DVD recorder automatically switches off the recording after this time.

The info line can be hidden by pressing x.

6Press »!« to pause recording.

7Press »●« to resume recording.

8Press »7« to end the recording.

–A warning message appears. Press »OK« to acknowledge it.

–The HDD DVD recorder updates the contents table of the disc.

Note:

If this message is not acknowledged, the HDD DVD recorder continues the recording.

9After a short while the »YesDVD« menu appears (only DVD +R/+RW).

Notes:

If you wish to use the YesDVD function, please read the section on executing the YesVideo function on the next page.

If you do not wish to use the YesDVD function, select »No« with »S« in the menu and confirm it with »OK«.

The YesDVD function cannot be used with recorded discs. This disc must be deleted before recording.

Finalising a disc (DVD+R/-R/-RW)

If you want to play programmes recorded on your HDD DVD recorder on a DVD player, you must first finalise the disc as described in the section on finalising discs (DVD+R/-R/-RW) on page 76.

Note:

Once the disc has been finalized, no further recording is possible.

Error messages

The HDD DVD recorder displays messages showing how to deal with any errors which might occur.

56