Grundig 5550 HDD manual Messages during or after programming a recording, Timer Recording

TIMER RECORDING _____________________

Item editor	Time: 18:00:05
Source	P001 ARD	S
Record To	HDD	S
Quality	SP	S
Mode	Once
Date	01 / 02 / 06
Start	20:15
End	21:45
Title	MyTitle
VPS	OFF	S
OK	Cancel

13Select »OK« with »S« or »A« and press »OK« to confirm the recording data.

– The »Timer list« menu appears on the screeen.

Note:

If you do not want to save the timer data, select »Cancel« with »S« or »A« and press »OK« to confirm.

14To make further recordings, repeat the instructions from step 3 or exit the »Timer list« menu with » « (green).

15Switch the HDD DVD recorder to standby by pressing »￿« on

the remote control.

– Display on the HDD DVD recorder: »￿«.

Caution:

Remember that the HDD DVD recorder can only record after you press »￿« on the remote control to switch it to standby.

Note:

The timer recordings can be cancelled by pressing »7«.

Messages during or after programming a recording

»Recording due to start – switch off the HDD DVD recorder« A programmed recording is due to start shortly.

Press »￿« to switch off the HDD DVD recorder.

»Timer starts in 3 minutes, press OK to start«
A programmed recording is due to start shortly. Press	the
»OK« button.
»No recording possible. No disc in the disc compartment.«
There is no disc in the compartment, or the disc is unsuitable
for recording. Put in another disc.
»Recording due to start, please insert a disc with sufficient record-
ing capacity«
The disc is write-protected or there is not enough playing time
left on it.
Remove the write protection or put in another disc.
»Input error«
Check the recording data for the programme (date, start time
and stop time) and change if necessary.
»Input error. Clashes with another timer recording.«
The recording times of two programmes overlap.
Change the recording data for one of the programmes	or	ENGLISH
delete it.

65