AUDIO SETTINGS _______________________
Selecting the digital output
SETUP MENU – AUDIO
Digital audio output
PCM Output |
a Dynamic Range |
RAW
LPCM 96K
Off
Here you select whether the audio signal is emitted from the »DIGITAL AUDIO OUT« socket in the original data format (All) or in PCM format (Pulse Code Modulation).
1Press »SET UP« to open the setup menu.
2Select
3Select »Digital audio output« with »S« or »A« and press »OK« to confirm.
4Select the mode (»RAW« or »LPCM«) by pressing »S« or »A« and press »OK« to confirm.
5Press »SET UP« to finish the setting.
Setting the sampling rate
SETUP MENU – AUDIO
Digital audio output
PCM Output
a Dynamic Range |
RAW
LPCM 96K
Off
This setting is used to adjust the sampling rate of the digital output. The sampling rate indicates how many samples can be read in per time interval.
–Use »96 K« for DVDs with a 96 kHz audio signal for optimum analogue audio output at the »L AUDIO OUT R« sockets.
–Use »48 K« for DVDs with a 48 kHz audio signal. The signal is emitted at the »L AUDIO OUT R« and »DIGITAL AUDIO OUT« sockets.
1Press »SET UP« to open the setup menu.
2Select
3Select »PCM Output« using »S« or »A« and press »OK« to confirm.
4Select the value (»LPCM 48 K« or »LPCM 96 K«) with »S« or »A« and confirm with »OK«.
5Press »SET UP« to finish the setting.
92