CONNECTION AND PREPARATION _____
Connecting the power cord
1 Plug the mains cable supplied into the
2 Plug the power cord into the wall socket.
Caution:
The only way to disconnect the HDD DVD recorder from the mains is to pull out the plug.
Note:
Do not connect any other equipment while the device is switched on. Switch off the other equipment as well before con- necting it.
Only plug the device into the mains socket after you have con- nected the external devices and the antenna.
Inserting batteries in the remote control
1To open the battery compartment, press the catch and remove
the lid.
2 When inserting the batteries (Mignon type, e.g. R06 or AA, 2 x1.5 V), observe the polarity marked on the battery compart- ment.
3Close the battery compartment.
Note:
If the HDD DVD recorder no longer reacts properly to remote control commands, the batteries may be flat. Always remove used batteries. The manufacturer accepts no liability for dam- age resulting from leaking batteries.
Environmental note:
Batteries, including those which contain no heavy metal, should not be disposed of with household waste. Please dispose of used batteries in an environmentally responsible manner. Find out about the legal regulations which apply in your area.
24
