Grundig 5550 HDD manual Using A Decoder, Recording pay TV programmes, Preparation, English

USING A DECODER _____________________

Recording pay TV programmes

Preparation

Switch on the television.

Select the »AV« channel on the television for the HDD DVD recorder.

Put a DVD+R, DVD+RW, DVD-R or DVD-RW into the disc compartment.

Please select the recording quality before starting the recording. See the section on custom settings and selecting the recording quality on page 96.

1When you switch on the HDD DVD recorder, the current pro- gramme that you can see on the television screen is recorded in the time shift memory.

2Press »SOURCE« to select the input source (for example, TV).

–Display: for example, »P1 ARD«, the current TV station is shown.

3Select the required pay TV station with »S« or »A« or with the numerical buttons »1…0«.

4If the programme is to be recorded on the HDD archive, start the recording with »●«

or

if the programme is to be recorded on disc, press » « (blue) to switch to disc mode, confirm with »OK« and start the record- ing with »●«.

Note:

After starting the recording, you can press »●« to enter the switch-off time (30 to 690 minutes in 30-minutes increments). The HDD DVD recorder automatically switches off the recording after this time.

5Press »7« to end the recording.

–A message appears. Acknowledge it with »OK«.

Note:

If this message is not acknowledged, the HDD DVD recorder continues the recording.

6When recording onto a disc, the »YesDVD« menu appears after a short while.

Note:

If you wish to use the YesDVD function, please read the section on executing the YesDVD function on page 57.

If you do not wish to use the YesDVD function, select »No« with »S« in the menu and confirm with »OK«.

ENGLISH

87