Chapter 4: Configuration
4.2 General configuration 4.2.1 Changing hotkeys
Wizard DP USB units use 
and 
as their standard hotkeys. These can be changed if they clash with other software or hard- ware within the installation.
4.2.1.1 To change the hotkeys
1Enter the Configuration menu.
2Press 
to enter the Hotkey menu and then press either: 
to choose Ctrl + Alt
to choose Ctrl + Shift
to choose Alt + Shift
to choose Right Alt
3Press 
to accept the setting and return to the main menu section.
4Press 
and then 
to exit the menu and save changes.
4.2.2 Mouse switching
You can enable or disable mouse switching to suit your installation requirements.
4.2.2.1 To enable/disable mouse switching
1Enter the Configuration menu.
2Press 
to enter the User Preferences menu and then press either: 
to Enable mouse switching
to Disable mouse switching
3Press 
to accept the setting and return to the main menu section.
4Press 
and then 
to exit the menu and save changes.
4.2.3 OPTIONS port speed
You can change the speed of the OPTIONS serial port.
4.2.3.1 To change the OPTIONS port speed
1Enter the Configuration menu.
2Press 
to enter the Baud rate menu and then press either: 
to choose 1200
to choose 2400
to choose 9600
to choose 19200
3Press 
to accept the setting and return to the main menu section.
4Press 
and then 
to exit the menu and save changes.
Page 19 |
