ServSwitch™ Wizard DP USB
3.2 Connections
Connections do not need to be carried out in the order given within this guide, however, where possible connect the power in as a final step.
3.2.1 User console
The ports that make up the user console are where you attach the peripherals that will be shared between the computer systems. Ensure that power is disconnected from the Wizard DP USB unit.
3.2.1.1 Connecting peripherals to the user console
1Position your peripheral devices in the vicinity of the unit such that their cables will easily reach.
2Keyboard and mouse: Attach the leads from your USB keyboard and mouse to the USB sockets specifically labeled with key- board and mouse symbols. The keyboard and mouse will operate in any of the USB sockets, however, True Emulation is not available on the sockets labeled USB1 or USB2.
INDOOR USE ONLY |
|
5V |
|
2. |
|
5A | USER |
| |
| SER |
| CONSOLE |
| LE |
OPTIONS
Note: The unit’s True Emulation feature will read the full characteristics of the keyboard and mouse and will present those to each connected computer concurrently. This ensures that specialist keyboards and mice are fully supported.
Figure
3 USB devices: Where required, attach the leads from your USB peripherals to the USB sockets labeled USB1 and USB2.
1
| U |
| USB1 |
| 1 |
U |
|
USB2.0 |
|
S . | USB2 |
SWITCHED | |
0 | U |
| 2 |
Figure
Page 10 |
