Paradyne 3800PLUS manual AT Command Equivalent

Call Setup Branch

To access Change Directory from the Call Setup branch, make the following selections:

Call Setup:		>
Change_Directory
F1	F2	F3

Press the key until Change Directory is displayed. Press any function key to select Change Directory.

01 : 5551234 ←
Nxt	"	#
F1	F2	F3

The phone number listed in directory location 1 is displayed. Select Nxt to display other directory locations.

Entering Telephone Numbers and Dial Command Modifiers into Directory Locations

The following example uses an empty directory location for describing how to enter a telephone number. If you want to change an existing telephone number in any of the ten directory locations, follow the same procedures.

To add a telephone number to a directory location, make the following selections:

02 : z

Nxt￿￿￿￿" #

F1 F2 F3

Select Nxt until a blank directory appears on the LCD. (The cursor ( { ) always appears in the first character position.)

Select F2 (") or F3 (#) until the desired character is selected. This can be an alpha or numeric character.

02 : 9 z

Nxt￿￿￿￿" #

F1 F2 F3

Press the key to move the cursor to the next character position.

Continue this key sequence until the dial command modifiers and telephone number are entered. (Refer to Table 5-1 for an explanation of the dial command modifiers available from the DCP.)

01 : 9W5556789 z

Nxt￿￿￿￿" #

F1 F2 F3

To save the number just entered, scroll to the next directory location by selecting Nxt. The number is now stored in nonvolatile memory.

AT Command Equivalent

The AT command for Change Directory is & Zn=x, where n is the directory location and x is the telephone number.

Table 5-1 describes what can be entered in directory locations.

3980-A2-GB30-20 November 1996 5-5