RCA HDP50 setup guide Basic Internet TV Setup, English

Basic Internet TV Setup

Follow these steps to use the HDP50 Kit with a TV or other home entertainment device that is Internet-capable.

1

Internet Signal

Modem or Router

OUT

1.Plug one of the HDP50 units into an electrical outlet near your modem. The Power indicator on the front of the adapter illuminates.

Important: The Powerlink Internet Media Kit work best when plugged directly into an electrical outlet. Do not plug them into a surge protector, plug strip, or extension cord.

English

2

2.Plug one end of an ethernet cable (not included) into a network out jack on your modem or router. Plug the other end into the ethernet jack on the bottom of the HDP50 unit.

3

4

Internet-Capable TV

— OR —

Internet-Capable Device

3.Plug the other HDP50 unit into an electrical outlet near your TV or other home entertainment device that is Internet-capable. The Power indicator on the front of the adapter illuminates.

4.Plug one end of a second ethernet cable (not included) into the network in jack on Internet- capable entertainment device. Plug the other end into the ethernet jack on the bottom of the HDP50 unit.

Within moments, the Link indicators on both units should start blinking. If they are blinking green or orange, your TV or other Internet-capable entertainment device is now connected to your Internet connection. If the Link indicators blink red or do not illuminate at all, see the Troubleshooting section in this manual for possible solutions.

You can use the HDP50 Powerlink Internet Media Kit to connect a PC to your Internet signal as well. Simply substitute your PC for the Internet-capable TV or entertainment device in step 4.

The opening of enclosure near AC plug to face up or frontal, the connector face bottom or rear.

3