Paradyne 3800PLUS manual 9 of 3800Plus S-Registers, AT Command, Description, Front Panel Branch

COMSPHERE 3800Plus Modems

Table 13-2

(9 of 13)

3800Plus S-Registers

AT Command

Description

Front Panel Branch

S62	V.25bis Coding	Configure\Edit\
	Register identifies to the modem the type of coding used by the DTE while	DTE Dialer
	in V.25bis mode.
	Register has the following values:
	0=ASCII
	1=EBCDIC
	Factory setting is ASCII.
S63	V.25bis Idle Character	Configure\Edit\
	Register identifies to the modem the type of idle fill used by the DTE while	DTE Dialer
	in V.25bis mode.
	Register has the following values:
	0=Mark
	1=Flag
	Factory setting is Mark.
S64	V.25bis New Line Character	Configure\Edit\
	Register identifies to the modem the type of line terminator used by the	DTE Dialer
	DTE while in V.25bis mode.
	Register has the following values:
	0=Carriage Return and Line Feed
	1=Carriage Return
	2=Line Feed
	Factory setting is carriage return and line feed (CR + LF).
S66	NMS Call Messages	Configure\Edit\Misc
	Register determines if the modem sends information regarding status (Call
	Progress) and/or sends summarized call statistics (Call Connect) to the
	dial network management system (COMSPHERE 6700 Series NMS).
	Register has the following values:
	0=Call Connect & Progress
	1=Disable
	2=Call Connect Only
	3=Call Progress Only
	The factory default templates do not affect S66.
S67	Directory Location 1 Callback	Configure\Edit\Misc
	Register determines if the modem uses the single number callback
	function.
	Register has the following values:
	0=Disable
	1=Enable
	Factory setting is Disable.
S69	Make Busy Via DTR	Configure\Edit\
	Register determines if the modem goes off-hook (busy) when DTR is Off.	Line Dialer
	Register has the following values:
	0=Disable
	1=Enable
	Factory setting is Disable.

13-22 November 1996 3980-A2-GB30-20