Paradyne 3800PLUS manual Index

Index

A

A/ (Repeat Last Command), 13-3 Abort (Test branch), 7-2

ac power connection, 2-5 requirements, D-3

Access from Remote, 8-40

Active (Operating) configuration area, 8-1 Active (Saved) configuration area, 8-1 Administrative Password, 11-4, 11-10 Answer, 5-3

Answer Access security, 11-2 Answer Access Security Mode, 8-43 Answer Security, 11-8

any-key abort, 5-2, 13-3, 13-4 Asymmetric Rate Mode, 13-16 AT Command Mode, 8-17 AT commands

″H (V.42bis Compression), 8-32, 13-13 &C (LSD Control), 8-12, 13-7

&D (DTR Action), 8-9, 13-7 &F (Factory Defaults), 13-8

&G (V.22bis Guard Tone), 8-25, 13-8 &I (Dial Transmit Level), 13-9

&J (Dial Transmit Type), 8-25, 13-9 &L (Leased Mode), 8-27, 13-9

&M (Async/Sync Mode and DTE Dialer Type), 8-7, 8-14, 13-10

&Q (Async/Sync Mode and DTE Dialer Type), 8-7, 8-14, 13-10

&R (RTS Action), 8-11, 13-10 &S (DSR Control), 8-10, 13-10 &T (Test), 13-11

&T0 (Abort Test), 7-2

&T1 (Local Analog Loopback), 7-3 &T2 (Pattern Test), 7-7

&T3 (Local Digital Loopback), 7-5

&T4, &T5 (Receive Remote Loopback Response), 8-37

&T6 (Remote Digital Loopback), 7-4 &T9 (Self-Test), 7-2

&V (View Configuration Options), 13-11 &W (Save to Memory), 13-11

&X (Transmit Clock Source), 8-13, 13-11 &Z (Store Telephone Numbers), 5-5, 13-11

%A (Error Control Fallback Character), 8-33, 13-13 %C (MNP5 Compression), 8-32, 13-13 +FCLASS (Service Class Selection), 13-13

\A (Maximum Frame Size), 8-35, 13-12

\C (Error Control Negotiate Buffer), 8-32, 13-12 \D (CTS Control), 8-11, 13-12

\G (Modem-to-Modem Flow Control), 8-34, 13-12 \K (Break Buffer Control, Send Break Control, Break Forces Escape), 8-15, 8-34, 8-35, 13-12

\N (Error Control Mode), 8-31, 13-12

\Q (Flow Control of DTE, Flow Control of Modem), 8-33, 13-13

\T (No Data Disconnect Timer), 8-21, 13-13 \X (XON/XOFF Passthrough), 8-34, 13-13 A (Answer Mode), 5-3, 13-3

D (Dial), 5-6, 13-3

DS (Dial Stored Number), 5-2, 13-4

E (Command Character Echo), 8-15, 13-4 echo, C-2

format, 13-2

H (Hook Switch Control), 5-3, 13-4 I (Identification), 6-3, 13-4

L (Speaker Volume), 8-40, 13-5 list of, 13-2

M (Speaker Control), 8-39, 13-5 O (Online mode), 13-5

Q (Result Codes), 8-16, 13-5

Sr? (Display S-Register Value), 13-5 Sr=n (Change S-Register), 13-5 using to change factory presets, 4-11 V (Result Codes Format), 8-17, 13-5

X (Extended Result Codes, Dial Tone Detect, Busy Tone Detect), 8-16, 8-19, 8-20, 13-6

Y (Long Space Disconnect), 8-21, 13-6 Z (Reset and Load Active), 13-6

AT Escape Character, 8-15 Auto Dial Standby, 8-30 Auto Redial, 8-30, 13-17 Auto-Answer Ring Count, 8-19

Automatic Firmware Download Center, 9-6 Automatic Make Busy, 8-21

automatic redialing, 8-18, 8-22, 8-30, 13-17 Automode (Dial Line), 8-24, 13-23 Autorate (Dial Line), 8-24, 13-23 Autorate (Leased Line), 8-28, 13-24

3980-A2-GB30-20 November 1996 Index-1