| SquareFold Trimmer Module |
| Problem solving | |
|
|
|
|
|
| Fault code | Possible cause |
| Recommended solution |
|
|
|
|
|
|
| A top cover is open. | 1. | Open the Top Left and Right Covers of the SquareFold |
|
|
|
| Trimmer Module. |
|
|
| 2. | Close the SquareFold Trimmer Module Top Left and Right |
|
|
|
| Covers. |
|
|
| 3. | If fault persists, power off/on the copier/printer. |
|
|
| 4. | If fault persists, call for service. |
|
|
|
|
|
|
| The Trimmer Waste Container is full or | 1. | Pull open the container and empty any trimmer scraps from |
|
| has a fault. |
| it. |
|
|
| 2. | Reinsert the container into the SquareFold Trimmer Module. |
|
|
| 3. | Ensure that the container is fully pushed in, and that the |
|
|
|
| indicator light is not lit. |
|
|
| 4. | If fault persists, repeat Steps |
|
|
| 5. | If fault persists, power off/on the copier/printer. |
|
|
| 6. | If fault persists, call for service. |
Booklet Tray on the SquareFold Trimmer Module is full.
1. Remove any booklets from the tray.
2.If fault persists, power off/on the copier/printer.
3.If fault persists, call for service.
User Guide | 19 |
