Xerox SquareFold Trimmer manual Square Fold options, Booklet Trimming / Pressing

SquareFold Trimmer Module Overview

Square Fold options

The Square Fold (Book Pressing) options are found in the following areas:

•On the SquareFold Trimmer Module control panel

•On the machine's UI

•From the print server on the Properties window for a selected network print job, and

•From the Properties window of a selected print job on your workstation

The Square Fold (Book Pressing) feature can be switched on or off based on user preference. When the feature is switched on, you can select one of five options depending on your requirements for the finished booklet job.

Note

For the remainder of this section, only the SquareFold Trimmer Module Control Panel and the machine's UI are shown. The descriptions given for each of the Square Fold options are applicable for both copy and network print jobs, and applies to any print server connected to the machine. To see the actual screens for each print server, go to the desired print server and follow the instructions given in the previous section entitled "Network print jobs."

+2/Higher: Use this setting when you want the most amount of

1.pressure applied to the spine of the booklet. The more pressure applied to the booklet, the more square the booklet spine will be. +2 is the greatest amount of pressure that can be applied to the booklet.

Additionally, you may want to select this setting when your finished booklet is five pages or less and on heavier weight paper (200 gsm or greater).

2.+1/High: Use this setting when you want a greater amount of pressure applied to the spine of the booklet, but not as much pressure as the +2 setting uses.

1.

2.

3.

4.

5.

3.Auto/Normal: This is the machine default setting and is used for most jobs.

-1/Low:Use this setting when you want less pressure

4.applied to the spine of the booklet. The less pressure applied to the booklet, the more rounded the booklet spine will be.

Booklet Trimming / Pressing		Cancel	Save
Trimming		Book Pressing
			Pressure Applied
Off	Paper Supply...	Off	Higher
On	Tray 1	On	High
	8.5 x 11"
	Plain
			Normal
	Cut to Size		Low
	Select a landscape paper		Lower
	and then adjust to the size
	you want to cut

5.-2/Lower:Select this setting when your finished booklet is five pages or less and on lighter weight paper (100 gsm or lower). -2 is the least amount of pressure that can be applied to the booklet.

Choose the setting that best fits your needs for the booklet output.

User Guide 7