How To Cancel Interval Shooting
If the “INTERVAL” message lights up on the LCD monitor, take the following procedures:
•Follow the procedures on the previous page and set the interval (time lapse) timer to [0:00:00].
•Slide the power switch off.
•Set the mode dial to switch to another mode.
How To Cancel Shooting
The “INTERVAL” message flashes on the LCD monitor while interval (time lapse) shooting is in progress. To cancel shooting while in progress, take the following procedures:
•Slide the power switch off.
•Set the mode dial to switch to another mode.
Using SOFT Mode
Smoothes the contours when photographing flat objects such as people, faces, walls, etc.
q Set the MODE dial to [ ] and then press the MENU button.
The Recording menu will appear.
Note • Press the MENU button to cancel the operation.
w Press the up ▼ or down ▲ button to
select SOFT MODE on the second screen.
MENU [RECORD] | ||
SOFT | MODE | :OFF |
S MODE | :ON | |
AUTO | BRACKET | :ON |
BACK:MENU | SEL.:ENTER | |
e Press the ENTER button to select ON and then press the MENU button.
r Press the release button to take the picture.
How To Cancel SOFT Mode
MENU [RECORD]
SOFT | MODE | :ON |
S MODE | :OFF | |
AUTO | BRACKET | :ON |
|
| |
BACK:MENU | SEL.:ENTER | |
Follow the above procedures and select OFF in step e.
70
