Ricoh RDC-5300 manual Shooting Still Picture Mode, Aim the camera at your subject

Shooting (Still Picture Mode)

Basic shooting instructions are given below. Hold the camera correctly to keep it steady.

q Aim the camera at your subject.

Set the wide angle and use macro mode to shoot subjects closer than 40 cm (15.8 inches).

See “Macro Shooting (Close-up Shooting)” (p.73)

w Press the ▼ or ▲ button to set the size of the subject.

See “Setting the Size of the Subject (Zoom)”

(p.46)

“How to View Images on the LCD

Monitor” (p.47)

e Press the shutter release button lightly with your fingertip.

The shutter release button works in a two-step action. When you press it lightly (halfway), the autofocus function is triggered to focus on the subject automatically. Keep the camera as steady as possible during this step to ensure correct focusing.

The AF indication LED (green) will light when the subject is in focus. The focus, exposure and white balance settings are set at this point.

●When the flash lamp lights

When the flash fires while taking photographs in dark places, etc., the flash lamp will light red when the release button is pressed lightly. During charging, the flash lamp will blink and the display on the LCD monitor will disappear. Photographs cannot be taken at this time.

12

1800x1200 N

INTERVAL

48