Ricoh RDC-5300 manual Macro Shooting Close-up Shooting, AdvancedShooting

Models: RDC-5300

1 134
Download 134 pages 26.72 Kb
Page 75
Image 75

Note • The flash will not fire when Auto Bracket is used.

Enable the keep settings to save the Auto Bracket. See Keep Settings. (p.104)

The digital zoom function is not available when Auto Bracket is used.

The continuous mode cannot be set when Auto Bracket is used.

Macro Shooting (Close-up Shooting)

Macro photography allows you to take a closeup picture of a subject. Macro photography up to about 4 cm (1.5 inches) away is made possible by setting the lens to the widest angle position. With the lens set at another position, macro photography as close as about 40 cm (15.8 inches) is possible.

q Set the mode dial to [ ].

wBring the camera close to the subject and decide the composition of the picture. Press the shutter release lightly to set the focus.

eGently press the shutter release button down fully to take the picture.

3

AdvancedShooting

Important

Note

The focusing range is so small in macro mode that the focus can be lost if the camera is moved. Make sure the camera is firmly positioned by mounting it on a tripod, for example, to keep it steady when shooting.

Light from the flash may appear red in shots taken in flash mode. The subject may also appear white in the resultant shot due to over-exposure.

Since the field of view throught the viewfinder and the shooting range are shifted by a wide margin, take pictures by confirming the shooting range through the LCD or with the camera connected to a TV monitor.

73

Page 75
Image 75
Ricoh RDC-5300 manual Macro Shooting Close-up Shooting, AdvancedShooting