
Note • Enable the keep settings to save the SOFT Mode setting. See Keep Settings. (p.104)
S Mode (Shutter Speed)
Using S mode, the shutter is released faster to make low light shots possible. If the “SLOW SHUTTER” message appears on the LCD monitor when you point the camera at a dark subject and press the shutter release button lightly, S mode will help reduce camera shake that tends to occur in this situation.
Important | • Pictures taken in S mode may occasionally have some noise. |
Note |
q Set the mode dial to [ ] and press the
MENU button.
The record menu will be displayed.
Note • To cancel the operation, press the MENU button.
wPress the ▼ or ▲ button to select [S MODE].
|
| 3 |
MENU [RECORD] |
| Advanced |
| Shooting | |
SOFT MODE | :OFF | |
S MODE | :OFF | |
AUTO BRACKET | :OFF | |
|
|
BACK:MENU SEL.:ENTER
ePress the ENTER button to select [ON] and press the MENU button.
The S mode is now set.
| MENU [RECORD] |
|
| |
SOFT | MODE | :ON | ||
S MODE | :ON | |||
AUTO | BRACKET | :OFF |
BACK:MENU SEL.:ENTER
rPress the shutter release button to take the picture.
The camera will automatically determine whether to shoot in S mode or not according to the brightness of the subject. If the “SLOW SHUTTER” message appears on the LCD monitor when you press the shutter release button lightly, the shot will be taken in S mode.
|
|
| 12 | |
|
| 1800x1200 | N | |
S | MODE | SLOW | SHUTTER |
|
|
|
|
| 71 |