Note • Moving the camera before the beep sounds, after pressing the shutter release button, could result in a blurred image.
How To Cancel the S Mode
Follow the above procedures and select [OFF] in step e.
Note • S mode works only when the flash is disabled from firing.
•Enable the keep settings to save the S mode setting. See “Keep Settings” (p.104).
Using Auto Bracket
This function takes three continuous frames: one each at the set exposure and at - 0.5EV and +0.5EV. This feature makes it possible to obtain correct exposure under difficult conditions.
Mount the camera on a tripod or level surface to prevent the camera from moving.
q Set the MODE dial to [ ] and then press the MENU button.
The Recording menu will appear.
Note • Press the MENU button to cancel the operation.
w Press the up ▼ or down ▲ button to turn AUTO BRACKET to ON.
Press the ENTER button to select ON when in OFF and then press the MENU button.
e Press the release button to take the picture.
When the release button is pressed, three frames will be taken at the set exposure of – 0.5EV, 0, + 0.5EV.
SOFT | MODE | :OFF |
S MODE | :OFF | |
AUTO | BRACKET | :ON |
BACK:MENU SEL.:ENTER
How To Cancel Auto Bracket
Follow the above procedures and select OFF in step e.
72
