Error Messages

If any of the error messages listed below appears on the camera’s LCD monitor, read the corresponding explanation and take the corrective action suggested.

FORMAT

Error message

INTERNAL

MEMORY

Error

Explanation and Remedy

Reference

Message

Page

 

FORMAT CARD

The SmartMedia memory card is

P. 33

 

unformatted. Format the card with the

 

 

camera before using it.

 

 

 

 

FORMAT

Format the internal memory before using it.

P. 105

INTERNAL

 

 

MEMORY

 

 

 

 

 

CARD ERROR

A SmartMedia memory card of this type is

 

not supported by this camera.

 

 

 

 

ERROR

Slide the power switch to turn the power off

XX-XX-XX-XX-XX

and then on again.

 

 

 

 

Note If the error display does not clear, reset the LCD monitor to its factory default: How to reset: With the terminal cover open, press the reset button (p. 10). If the error display still won’t clear, call your dealer or our service contact.

LCD Panel

Initial display (SETUP mode)

The LCD panel appears

blank.

14

Page 16
Image 16
Ricoh RDC-5300 manual LCD Panel, Error Messages, Initial display Setup mode, Error Explanation and Remedy Reference