Panasonic Essential Software for Your Camcorder Accessories

EdNng Mode

Still pictures can be recorded on the Memory Card from scenes that have already been recorded on a cassette.

1Set the Mode Dial to Tape Playback Mode.

•The One-Touch Navigation icon is displayed on the lower right of the screen.

lOne-Touch Navigation icon]

2Insert a tape which already has recorded

contents and a card.

3Move the Joystick Control [A] to start

playback and set the Camcorder to Still

Playback Mode at the scene you wish

to record, and press the [PHOTO SHOT]

Button.

•Audio will not be recorded.

Note:

. If you press the [PHOTO SHOT] Button without pausing, blurred pictures may be recorded.

You can add music or narration to the recorded Cassette.

. If the tape recorded in the [16bit] Mode is dubbed with the Audio Dubbing function, the original sound is erased. (If you wish to preserve the original sound, use the [12bit] Mode when recording.)

. Audio Dubbing cannot be performed on a recording made in LP Mode. (p. 29)

*Set to Tape Playback Mode.

1Find a scene that you want to add sound

to, and press the [ la ] Button on the Remote Control.

2Press the [AUDIO DUB] Button on the Remote Control.

. The [ hi]Ill]Ill]Indication appears.

3To start Audio Dubbing, press the [ la ] Button on the Remote Control. Or, move the Joystick Control [A] to select [ o/_l1.

. The [ I_gll_®] Indication appears.

. Talk into the microphone.

4 Press the [mm] Button on the Remote

Control to stop audio dubbing. Or, move

the Joystick Control [A] to select [ e/il ] again.

. The Camcorder is in the Still Playback Mode again.

Before		Recording		with	Audio		Dubbing
.	Set to	Tape	Recording	Mode
.	When	you want to preserve			the	original sound
	taken	during	recording,	set	[ _	ADVANCED]

>>[j_ AUDIO REC] >> [12bit] to take pictures. (When set [16bit], the sounds taken during recording are erased after recording with audio dubbing.)

. Set [ _ BASIC] >> [ _ REC SPEED] >> [SP] to take pictures.

To	Play		Back	the	Sound		Recorded		by
12bit		Audio		Dubbing
Set	[ _ SETUP]			>> [ _ 12bit			AUDIO]	>> [ST1],
[ST2]		or	[MIX].
ST1:			It plays	back	only	the	obginal	sound.
ST2:			It plays	back	only	the	sound	added	by
			Audio Dubbing.
MIX:			It plays	back	both	the	original	sound
			and the sound added by Audio Dubbing
			simultaneously.

,During Audio Dubbing, it is automatically set to [ST2].

Notes:

•The blank section of a tape cannot be dubbed.

•Sounds sent through the DV terminal cannot be dubbed.

•If a tape has a non-recorded portion when the tape is dubbed, images and sounds may be disturbed when this portion of the tape is played back.

•In the case of importing data recorded with Audio Dubbing to a PC using the PC's software, only the original sound (ST1) may be imported, depending on the software.

rrl

o

o. tb

53