Panasonic PV-GS39, PV-GS29 Fade, Press, With Indication, Record NOW Fading, Image/audio

, Fade In :

The image and audio gradually appear.

. Fade Out :

The image and audio gradually disappear.

,Set to Tape Recording Mode.

1Press the Joystick Control to display the One-Touch Navigation icon on the lower right of the screen.

2Move the Joystick Control [T] until the page with [ I_ ] indication is displayed.

Move the Joystick Control [4] to select

[B].

•The [FADE ON] is displayed.

•The [1_1W] or [[] B] Indication flashes and then is displayed.

4 Press the Recording Start/Stop Button.

Start	recording.		(Fade	in)
. The	[RECORD		(NOW	FADING)]	is displayed.
When	you	start	recording, the image/audio
disappeared		completely		and the	image/audio
gradually appears.

Pause recording. (Fade out)

. The [PAUSE (NOW FADING)] is displayed.

The image/audio gradually disappears. After the image/audio compieteiy disappears, recording stops.

Ill To Cancel Fading

Move the Joystick Control [_i] to select [ [] ] again.

•The [FADE OFF] is displayed.

I To Select the Color For Fade in/out

The color which appears in fading pictures can be selected.

1Set [ _ ADVANCED] >> [ [] FADE COLOR]

>> [BLACK] or [WHITE].

Note:

•While the Fade in/Fade out function is selected, it takes several seconds to display the image when you start recording images. Besides, it also takes several seconds to pause recording.

This prevents the subject from being recorded too darkly when backlit. (Backlight is the light that shines from behind the subject being recorded.)

•Bet to Tape/Card Recording Mode.

1	Press the		Joystick	Control	to display	the	o
	One-Touch		Navigation icon on the lower				._'
	right	of the screen.
2	Move	the	Joystick	Control	[_'] until	the	o_
	page	with	[ _ ] indication		is displayed.		Q.
							•

Move the Joystick Control [J,] to select

. The [BACKLIGHT COMPENSATION ON] is displayed. The [ _ ] Indication flashes and then is displayed.

. The entire screen becomes bbghter.

I To Resume Normal Recording

Move the Joystick Control [A] to select [ _ ] again.

. The [BACKLIGHT COMPENSATION OFF] is displayed.

Notes:

•When setting the iris manual(y, the Back(ight Compensation Function does not work.

•if you operate the [OFF/ON] Switch or Mode Dial, the Backlight Compensation Function is canceled.

37