Panasonic PV-GS39, PV-GS29 operating instructions

Direct the Remote Control at the Remote

Control Sensor of the Camcorder and

press an appropriate button.

15 °

•Before connecting or disconnecting the power supply, set the [OFF/ON] Switch on the Camcorder to [OFF] and make sure that [STATUS] indicator is not lit. (p. 20)

W

5"

C

{.Q

_°_ -;_'_"_l ( //

15°

•Distance from the Camcorder: Within

approximately 15 feet (5 meters)

•Angle: Within approximately 15 ° in the vertical and horizontal directions from the central axis

. The above operating ranges are for indoor use. Outdoors or under strong light, the Camcorder may not operate properly even within the above ranges.

Ill Selecting Remote Control Modes When 2 Camcorders are used simultaneously, they can be operated individually by selecting different Remote Control Modes.

•If the Remote Control Mode of the Camcorder and that of the Remote Control do not match with each other, [REMOTE] will appear. When the Remote Control is operated for the first time after the Camcorder is turned on, [CHECK REMOTE MODE] (p. 71)will appear and operation is impossible. Set the same Remote Control Mode.

Ill Setup on the Camcorder

Set [ j:( REMOTE] on the [ _ SETUP] Sub-Menu to the desired Remote Control Mode. (pp. 27, 28)

Ill Setup on the Remote Control

[VCR1]:

Press the [l_] Button and [ m ] Button

simultaneously. O

[VCR2]:

Press the [_1] Button and [ g ] Button

simultaneously. O

. When the battery in the Remote Control is

replaced, the mode is automatically reset to [VCR1] Mode.

1 Connect the DC Cable to the Camcorder.

2 Connect the DC Cable to the AC Adaptor.

3 Connect the AC Cable to the AC Adaptor and the AC Jack.

Before use, fully charge the Battery.

•We recommend using a Panasonic Battery.

•We cannot guarantee the quality of this Camcorder when batteries from other companies are used.

1Attach the Battery to the AC Adaptor and charge it.

2Put the Battery on the Battery Mount by

aligning the mark, and then securely plug it in.

15