Tascam RC-601mkII Specifications, List of Error Messages, External Dimensions, General, Phones

SPECIFICATIONS

I/O			External Dimensions
PHONES
Connector:	Stereo phone jack		216 mm
Max. output level:	50 mW + 50 mW (at 32 Ω load)
PLAYER UNIT
Connector:	D-Sub 15-pin
Electrical characteristics:	RS-232C-compliant
MONITOR IN
Connector:	D-Sub 25-pin
Max. input level:	+6 dBV
Headphone output electrical characteristics
Playback frequency characteristics:
	20 Hz to 20 kHz, +1.0/-2.0 dB
Signal-to-noise ratio:	70 dB or more (20 kHz LPF,
	A-weighted)
Distortion (THD + N):	0.5 % or less (20 kHz LPF)
	[1 kHz max. output level]
General
Power requirements:	D C p o w e r s u p p l i e d	f r o m	201 mm
	CD-601MKII
External dimensions:	216 W x 69 H x 201 D (mm)
	(including feet and protrusions)
Weight:	1.3 kg (excluding cables)
Accessories:	Connector cable (5 m), Owner’s
	Manual, Warranty

zSpecifications and external appearance are subject to change without notice in the interest of product improvement.

zNote that illustrations in the Owner’s Manual may differ on some products due to product improvements.

List of Error Messages

If the following error messages are displayed during CD player use, try performing the remedies described in the following table.

Indication	Description	Remedy
ERR01	TOC READ Error	• The disc is scratched.
ERR02	GFS Error	→ Replace the disc.
		• The disc is dirty.
ERR03	Focus Error
		→ Clean the disc.
ERR04	SUBQ Error	Replace the disc.
ERR05	TRAY LOADING Error	Check the disc tray for foreign objects.
ERR06	SLED Error
ERR07	SYSTEM Error	Turn the power OFF then back ON again.
ERR08	MEMORY Error

201 mm

69 mm

28 TASCAM RC-601MKII