BASIC OPERATIONS
Online Playback and Monitor Playback
The
For example, in sites such as broadcasts and events, the monitor playback mode can be used to cue tracks or playback points before the final take, and then the remote control unit can be set to online standby (READY), and online playback can be performed from that point at the time of the final take.
On this remote control unit, the UNBALANCED analog output terminal and SPDIF digital output terminal are positioned as terminals for monitor output, and the BALANCED analog output terminal and AES/EBU digital output terminal are positioned as terminals for online output.
Note, however, that in the default setting both the monitor playback signal and the online playback signal are output in the same way from all analog/digital output terminals.
B y c h a n g i n g t h e m e n u s e t u p , y o u c a n s e t t h e UNBALANCED analog output terminal and SPDIF digital output terminal for monitor exclusive output, or the BALANCED analog output terminal and the AES/EBU digital output terminal for online exclusive output.
(→ page 24 “Setting the Terminals for Online Output”) (→ page 24 “Setting the Terminals for Monitor Output”)
[NOTE]
•This manual refers to the online playback standby state as “online READY” and the monitor playback standby state as “monitor PAUSE.”
Preparations
1Connect the
Use the remote cable provided with the remote control unit to connect the PLAYER UNIT terminal on the remote control unit with the REMOTE (SERIAL) terminal on the
CAUTION
•Perform the above connection with the
Also turn the power OFF before disconnecting.
2Set whether to enable or disable operation on the
Select “R_L” or “R” at menu item No. 17 (“RMT”).
R_L: Operation is possible from both the
R: Operation is possible from only
z For details on menu operations, see “Menu Operations” (page 13).
3Turn the POWER switch on the rear panel of the
4Load a disc in the
z For details on loading discs, refer to “Preparations” in the
Selecting the Playback Mode
You can select the playback mode by using the PLAY MODE key.
Each press of this key switches the playback mode in the following order:
Regular playback (all tunes) → single playback → program playback
The current playback mode is displayed in the playback mode display area of the display window.
Playback Mode | Display Window | Operation |
Regular playback | (nothing displayed) Tunes are played | |
|
| back in disc track |
|
| o r d e r . ( r e g u l a r |
|
| playback) |
Single playback | SINGLE lit | Only the selected |
|
| track is played back. |
Program playback | PROGRAM lit | Tunes are played |
|
| back in the preset |
|
| program order. |
zThe selected playback mode is backed up on the remote control unit. So, the same mode is reproduced when the remote control unit is next turned ON.
Playing a Specific Tune from the Beginning (SINGLE play)
The following describes the procedure for playing the final take (online playback) after selecting and confirming a desired tune (monitor playback). The following description assumes that the procedure is performed with menu items at their default settings.
1Select the single mode using the PLAY MODE key.
Press the PLAY MODE key several times until “SINGLE” lights in the playback mode display area of the display window.
2Press the PAUSE key to enter the monitor PAUSE mode. The PAUSE indicator starts blinking.
3Select the tune (track) to play back using the TRACK key.
The monitor PAUSE mode is enabled at the start of the selected track.
z The track can also be selected by using numeric keys. In this case, enter a
8 TASCAM
