Tascam RC-601mkII owner manual Saving Disc Information, Memory Banks, Reading Disc Information

SAVING DISC INFORMATION

Cue points and other disc information saved on each disc can be saved to memory on the CD-601MKII.

In addition to cue point information, disc ID, A/B memo points, pitch control values, playback mode, time display mode, and other disc information is saved.

Memory Banks

Disc information is stored to memory on the CD-601MKII. Five memory banks (A to E) are provided, and 100 discs’ worth of disc information can be stored per bank. Up to ten points can be registered to each disc.

The disc information of the same disc cannot be stored to the same bank. However, it can be stored to different banks.

Saving Disc Information

Disc information is saved to internal memory on CD-601MKII by the following operation.

1Select the save destination memory bank (A to E) using menu No. 13 (“BANK”).

2Press the SET key to set the remote control unit to the set mode.

The SET indicator lights.

3Press the Úkey.

This saves the disc information to the bank, and the memory indication (“M”) in the display window lights.

The SET indicator goes out.

zWhen the disc information of the same disc is already saved, the message “Over write?” prompting you if it is OK to overwrite the information will be displayed. To overwrite the information, either press the Úkey again, or turn the SEARCH dial clockwise (towards YES). To not overwrite the information, either press the CLR key, or turn the SEARCH dial counterclockwise (towards NO).

zThe message “Over write?” prompting you if it is OK to overwrite the information will also be displayed when 100 discs’ worth of information is already saved.

To overwrite, select one of memory Nos. 1 to 100 to overwrite using the JOG/DATA dial, and either press the Úkey again, or turn the SEARCH dial clockwise (towards YES). To not overwrite the information, either press the CLR key, or turn the SEARCH dial counterclockwise (towards NO).

Reading Disc Information

When a disc containing disc information saved to internal memory on the CD-601MKII is loaded, the memory indication (“M”) lights in the display window.

To read disc information, perform the following.

1Press the RCL key.

The RCL indicator lights, and the “M” indication in the display window blinks.

2Press the Úkey.

The disc information is read, and the “M” indication in the display window stops blinking and is lit.

The RCL indicator goes out.

Clearing Disc Information

The disc information currently saved to internal memory on the CD-601MKII can be cleared. All of the disc information in all of the banks is cleared by the following operation.

When menu No. 21 (“A_CLR”) is selected, the message “SURE?” will be displayed. Press the Úkey (or turn the SEARCH dial clockwise).

The details that are cleared differ according to the setting of menu No. 22 (“USER”) as follows: (→ page 15 “Saving Menu Settings”)

•When set to “U1” to “U5”: All disc information is cleared.

•When set to “PRE”: All disc information is cleared, and the menu settings of user banks “U1” to “U5” are returned to their default settings.

TASCAM RC-601MKII 23