MENU OPERATIONS
Menu Operation Basics
To enter or exit the menu mode, use the MENU key. In the menu mode, use the SEARCH dial, JOG/DATA dial and Ú key for operations in the menu mode.
1Press the MENU key.
The menu screen is displayed in the display window. The following are displayed in each menu screen.
Menu No. Menu item name Current setting value
Details Display
2Use the JOG/DATA dial to select the desired menu item.
Turning the dial clockwise increments the menu No., while turning it counterclockwise decrements the menu No.
z At this stage, the menu No. blinks to indicate that the menu item is currently selected.
z The menu item display is scrolled immediately after the screen is switched, and then the leading 12 characters are displayed fixed in the display window. For some menu items, the details of individual setting values are displayed in addition to the item details.
3Either press the Úkey, or turn the SEARCH dial clockwise (towards YES) to apply the selected menu item.
The menu No. stops blinking and stays lit.
z The following steps (4 to 6) are not applied to menu No. 05 (“PROG”), menu No. 21 (“A_CLR”) and the total motor time display.
4Use the JOG/DATA dial to select the desired setting value.
The current setting value blinks when it is changed.
5Either press the Úkey, or turn the SEARCH dial clockwise (towards YES) to apply the selected setting item. When the new settings are fixed, the menu mode automatically ends.
[NOTE]
•The alphabet characters of the menu item names are displayed as follows:
•All operations including menu operations on the
•Likewise, when menu operations are being performed on the
14 TASCAM