Tascam RC-601mkII Clearing the Frame Display, Viewing the Total Motor Time, Timer Play Function

OTHER FUNCTIONS & SETTINGS

Clearing the Frame Display

The frame digit in the time display that is displayed in the display window can be cleared.

Select from the following using menu No. 18 (“FRAME”):

ON (default setting): The frame digit is displayed.

OFF: The frame digit is not displayed.

AUTO: The frame digit not displayed only during online playback.

Viewing the Total Motor Time

To view the total time that the CD mechanism motor in the remote control player has been used, select the item following menu No. 23 (before menu No. 01) without a menu No.

The menu example above shows that the total motor time is 234 hours.

Timer Play Function

When the timer play function is set to ON, monitor playback is started automatically when the remote control unit is turned ON.

Select timer play function ON/OFF using menu No. 07 (“TIMER”).

Selection: OFF (default setting), ON

External Control-related Settings

The rear panel of the CD-601MKII is provided with the REMOTE (PARALLEL) terminal (37-pin D-Sub connector) and the REMOTE (SERIAL) terminal (15-pin D-Sub connector, RS-232C-compliant) for external control.

For example, fader start/stop and event start operations can be performed using the REMOTE (PARALLEL) terminal. The REMOTE (SERIAL) terminal can be used to control the CD-601MKII from a computer. (Note, however, that when the remote control unit RC-601MKII is used, the REMOTE (SERIAL) terminal is exclusively for the remote control unit, and cannot be used for other applications.)

For details on external control, refer to the Owner’s Manual for the CD-601MKII.

TASCAM RC-601MKII 27