NAMES & FUNCTIONS OF PARTS
CHECK key
This key is used for checking times preset to cue point and memo points.
When the memo mode is OFF, cue points can be checked. When the memo mode is ON, memo points (A and B) can be checked. (→ page 19 “Confirming the Time of Memo Points”) (→ page 22 “Confirming the Time of Cue Points”)
Pressing the CLR key while a point is displayed clears that point.
MEMO key
Switches the memo mode ON/OFF. (→ page 19 “Functions Using Memo (A, B) Points”)
A, B keys
By setting any two points as points A and B, you can perform playback between two points, automatically stop at point B, or perform rehearsal playback at points A and B. (→ page 19 “Functions Using Memo (A, B) Points”)
PLAY MODE key
This key functions in the same way as the PLAY MODE key on the
The current playback mode is displayed in the playback mode display area of the display window.
(→ page 8 “Selecting the Playback Mode”)
REPEAT key
Turns the repeat functions ON/OFF. (→ page 18 “Repeat Function”)
PITCH CONTROL, +, - keys
The PITCH CONTROL key functions in the same way as the PITCH key on the
Use the +/- key to set the pitch control value within the ±12.5% range. (→ page 17 “Pitch Control Function”)
RCL key
This key is used to recall cue points.
SET key
This key is used to set memo points or cue points, and save disc information. (→ page 19 “Setting Memo Points”) (→ page 21 “Setting Cue Points”) (→ page 23 “Saving Disc Information”)
AUTO READY key
This key functions in the same way as the AUTO RDY key on the
TASCAM
