OTHER FUNCTIONS & SETTINGS
Headphone Monitor Functions
On the
Monitoring on Headphones
Select the headphone monitor source using the MONITOR SELECT knob. The selected source signal is output from the PHONES terminal.
Adjust the monitor level using the LEVEL knob.
Connecting Audio Signals
Stereo audio signals of up to four systems can be input to the MONITOR IN terminal on the rear panel.
Connect to the audio output (max. output level: +6 dBV, unbalance) of the external equipment according the following pin arrangement.
[NOTE]
•The MONITOR IN terminal must be connected to also when the audio output signal of the
131
2514
MONITOR IN Pin Arrangement
Pin No. | Signal Name |
|
|
1 | Lch IN1 | Monitor input 1 Lch | |
2 | Rch IN1 | Monitor input 1 Rch | |
3 | N.C. |
|
|
4 | Lch IN2 | Monitor input 2 Lch | |
5 | Rch IN2 | Monitor input 2 Rch | |
6 | N.C. |
|
|
7 | Lch IN3 | Monitor input 3 | Lch |
8 | Rch IN3 | Monitor input 3 | Rch |
9 | N.C. |
|
|
10 | Lch IN4 | Monitor input 4 | Lch |
11 | Rch IN4 | Monitor input 4 | Rch |
12N.C.
13N.C.
14 | Lch GND1 | Monitor input 1 Lch shielded | |
15 | Rch GND1 | Monitor input 1 Rch shielded | |
16 | N.C. |
|
|
17 | Lch GND2 | Monitor input 2 Lch shielded | |
18 | Rch GND2 | Monitor input 2 Rch shielded | |
19 | N.C. |
|
|
20 | Lch GND3 | Monitor input 3 | Lch shielded |
21 | Rch GND3 | Monitor input 3 | Rch shielded |
22 | N.C. |
|
|
23 | Lch GND4 | Monitor input 4 | Lch shielded |
24 | Rch GND4 | Monitor input 4 | Rch shielded |
25 | N.C. |
|
|
Referencing to an External Clock Source
The remote control unit can be operated referenced to an external digital clock.
1Connect the word clock from an external source to the WORD SYNC IN terminal on the rear panel of the
2Set menu No. 04 (“CLOCK”) to “EXT”.
“EXT CLK” and the sampling frequency (“44.1k” or “48k”) are lit on the clock display area of the display area.
The default setting is “INT” (referenced to internal clock).
Failsafe Function
The failsafe function is a safety function for preventing playback from discontinuation when an operation key is touched inadvertently during a final take.
In the default setting, the failsafe function is ON, and operation of keys other than STOP, PLAY MODE and DISPLAY MODE is not accepted during online playback. Also, in the online READY mode, operation of search- related keys such as the TRACK key and numeric keys and the MENU key is not accepted.
[NOTE]
•Even when the failsafe function is ON, entry by the numeric keys is accepted in the direct cue point locate mode and flash start mode.
When the failsafe function is set to OFF at menu item No.
10(“F_SAFE”), all keys (excluding SEARCH dial, FLASH READY key and MEMO key in the online playback mode) are functional.
The failsafe function ON/OFF setting is valid on both the
TASCAM