SELECTING THE PLAYBACK POINT
Selecting a Track
Track skip
Tracks can be selected (skipped) by using the TRACK(Â/ ¯) key.
Âkey:
Pressing this key when the elapsed time of a track is one second or more returns the remote control unit to the start of that track. When the elapsed time is less than one second, the remote control unit skips to the start of the previous track.
¯key:
The remote control unit skips to the start of the next track. Pressing this key again makes the remote control unit skip to the start of the following track.
•In the program playback mode, the remote control unit skips to the previous and next tracks according to the program order.
•When the  key is pressed at the start of track 1, the remote control unit skips to the start of the final track, and when the ¯ key is pressed at the final track, the remote control unit skips to the start of the first track.
•When the  or ¯ key is pressed while disc operations are stopped, the remote control unit skips to the start of the first track on the disc.
RC-601MKII operation after track selection
Operation of the remote control unit after a track is selected by the TRACK key differs according to the operating state of the remote control unit when this key is pressed, the ON/OFF state of the auto cue function, and the auto cue up setting. (→ page 17 “Auto Cue Function”)
When the auto cue function is ON:
When the auto cue function is ON, the remote control unit basically stands by according to the auto cue up setting.
When the auto cue function is OFF:
The remote control unit enters the same state as that before the TRACK key is pressed. Note, however, that the remote control unit enters the monitor playback mode when a track has been selected while disc operations were stopped or while the tray was open.
Specifying the track No.
While disc operations are stopped, in the monitor playback mode or in the monitor PAUSE mode, you can use the numeric keys to specify track numbers.
Specify tracks using two digits. For example, to specify track 3, press “0” and then “3”.
When the INDEX SEARCH indicator is lit, you cannot specify tracks using the numeric keys as the numeric keys are used for specifying the index No.
[NOTE]
•If a
TASCAM
