PLAYBACK-RELATED FUNCTIONS
Program Playback
The program playback function can be used to play back a disc in any desired track order. Up to 30 tracks can be programmed.
Entering the program mode
Select the program mode using the PLAY MODE key.
Press the PLAY MODE key for the required number of times until “PROGRAM” is displayed in the message display area of the display window.
In the program mode, the disc is played back according to the program made by the method described as follows.
Programming
1Press the MENU key to enter the menu mode.
2Use the JOG/DATA dial to select menu No. 05 (“PROG”), and either press the Úkey or turn the SEARCH dial clockwise (towards YES).
The display window changes to the program setup screen.
3Use the numeric keys, TRACK key or JOG/DATA dial to select the desired track, and turn the SEARCH dial clockwise (towards YES).
The selected track is set as the 1st tune (program No.
01)of the program, and the next tune (program No. 02) can be set.
4Repeat step 3 above for the required number of times to make the desired program.
5When you have finished making the program, press the MENU key to exit the menu mode.
Swapping programmed tracks
You can swap programmed tracks by performing the following procedure while the program setup screen is displayed.
1Press the SEARCH dial to select the program No. that you want to swap.
2Use the numeric keys, TRACK key or JOG/DATA dial to select the desired track, and press the Úkey (or turn the SEARCH dial clockwise).
3When you have finished swapping the track, press the MENU key to exit the menu mode.
Adding program tunes
You can add a program tune by performing the following procedure while the program setup screen is displayed.
1Press the SEARCH dial, and select the location to add a tune. For example, to add a new tune between the tunes currently preset to program Nos. 2 and 3, select program No. 3.
2Press the Úkey.
3Use the numeric keys, TRACK key or JOG/DATA dial to select the track to add, and press the Úkey (or turn the SEARCH dial clockwise).
4When you have finished adding tunes, press the MENU key to exit the menu mode.
Deleting program tunes
You can delete a program tune by performing the following procedure while the program setup screen is displayed.
1Press the SEARCH dial, and select the program number that is preset with the tune to delete.
2Press the CLR key.
This deletes the tune, and the program Nos. of the following tunes are rounded up.
3When you have finished deleting tunes, press the MENU key to exit the menu mode.
Clearing a program
Opening the disc tray clears the program.
[NOTE]
•The program settings are not cleared even if the CD player is turned OFF with a disc loaded.
16 TASCAM
