Needle Replacement
Needle Replacement
Removal
1.Relieve pressure.
2.Remove air cap (1).
3.Push trigger slide (4) over to NEEDLE REMOVAL position (D) shown on page 2.
4.Remove fluid nozzle (2).
5.Pull needle (3) out.
Installation
1.Insert needle (3).
2.Install fluid nozzle (2).
3.Push trigger slide (4) over to SPRAY position (E) shown on page 2.
4.Install air cap.
6
3 4
1 2 5
ti12766a
Material / Fluid Set Selection Guide
Material | Fluid Set #2 | Fluid Set #3 | Fluid Set #4 | Fluid Set #5 | Fluid Set #6 |
| 256946 | 256947 | 256948 | 256949 | 256950 |
Dye
Ink
Automotive Finish
Lacquer
Stain
Enamel
Epoxy
Urethane
Varnish
Primer
Industrial Finishes
Latex
Butyrate
Nitrate Dope
Oil Wall Paint
Selecting Fluid Sets:
Grooves at end of fluid needle indicate size of fluid set. Example: Needle with 2 grooves on end goes with #2 fluid set.
ti13753a
Swivel Tube Adjustment
The adjustable swivel tube allows the gun to be held in any position while spraying.
To adjust the position of the tube in the cup:
1.Loose nut (F). Rotate cup to desired spray position.
2.Tighten nut (F).
Optional Artisan Air Valve (256927)
Installation
1.Remove air plug housing.
2.Install Artisan air valve.
F | ti12777a | ti12910a |
| ||
ti12776a |
|
|
4 | 313317C |
