Siemens S223, S323 To configure a subnet mask, use the following command, To the boot mode only

User Manual	UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5

Step 2

To enable the MGMT interface to communicate with TFTP server, you need to configure a proper IP address, subnet mask and gateway on the interface.

To configure an IP address, use the following command.

Command	Mode	Description
ip A.B.C.D	Boot	Configures an IP address.
ip		Shows a currently configured IP address.

To configure a subnet mask, use the following command.

Command	Mode	Description
netmask A.B.C.D	Boot	Configures a subnet mask. (e.g. 255.255.255.0)
netmask		Shows a currently configured subnet mask.

To configure a default gateway, use the following command.

Command	Mode	Description
gateway A.B.C.D	Boot	Configures a default gateway.
gateway		Shows a currently configured default gateway.

To display a configured IP address, subnet mask and gateway, use the following com- mand.

Command	Mode	Description
show	Boot	Shows a currently configured IP address, subnet mask
		and gateway.

!	The configured IP address, subnet mask and gateway on the MGMT interface are limited
	to the boot mode only!

The following is an example of configuring an IP address, subnet mask and gateway on the MGMT interface in the boot mode.

Boot> ip 10.27.41.83

Boot> netmask 255.255.255.0

Boot> gateway 10.27.41.254

Boot> show
IP	= 10.27.41.83
GATEWAY	= 10.27.41.254
NETMASK	= 255.255.255.0
MAC	= 00:d0:cb:00:0d:83
MAC1	= ff:ff:ff:ff:ff:ff
Boot>

A50010-Y3-C150-2-7619 375