Siemens S223, S323 Displaying Mrib Information, Multicast Time-To-Live Threshold, Mrib Debug

User Manual	UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5

9.1.4Displaying MRIB Information

To display MRIB information, use the following commands

Command		Mode	Description
show ip mroute {dense sparse}
{count summary}
show ip mroute GROUP-ADDR
[SRC-IP-ADDRESS] {dense
sparse} {count summary}		Enable	Displays multicast routes entries.
show ip mroute GROUP-ADDR
		Global	GROUP-ADDR: group IP address
[SRC-IP-ADDRESS]	GROUP-
		Bridge	SRC-IP-ADDRESS: source IP address
ADDR [SRC-IP-ADDRESS]{dense

sparse} {count summary}

show ip mroute GROUP- ADDR/M {dense sparse} {count summary}

To display the contents of the MRIB VIF table, use this command.

Command	Mode	Description
show ip mvif [IFNAME]	Enable	Displays IP multicast interface.

9.1.5Multicast Time-To-Live Threshold

Use this command to configure the time-to-live (TTL) threshold of packets being for- warded out of an interface.

Command	Mode		Description
ip multicast ttl-threshold		Configures the	time-to-live threshold for multicast
		packet
<0-255>	interface
		Default: 1
no ip multicast ttl-threshold		Restores is as a default.

9.1.6MRIB Debug

Use this command to debug events in the multicast RIB.

Command		Mode	Description
			Debugs event in the multicast RIB.
			all : all Ipv4 multicast debugging
debug nsm mcast {all fib-msg			fib-msg: multicast FIB messages
			mrt: multicast routes
mrt register stats vif}
		Enable	register: multicast PIM register messages
			stats: multicast statitics
			vif: multicast interface
no debug nsm mcast {all	fib-		Disables the debug event.
msg mrt register stats vif}

A50010-Y3-C150-2-7619 281